Epoch Indoor Racer - epoch1-43.com

Go Back   epoch1-43.com Forums > General Discussion > Parts and Hop-Ups

Reply
 
Thread Tools Display Modes
  #1  
Old 11-21-2005, 09:53 AM
dog's Avatar
dog dog is offline
Newbie
 
Join Date: Nov 2005
Posts: 8
Default wheel bearings?

anyone fitted wheel bearings yet?

size...
where to get, etc...
__________________
good dog
Reply With Quote
  #2  
Old 11-22-2005, 12:30 AM
janniz janniz is offline
Newbie
 
Join Date: Jul 2005
Posts: 3
Default

Sure - I guess a lot of people allready did that... and it works quite good.
Here's what I did:








Remove the "nail" that is your front axle - replace it with some 2mm carbon fibre or steel shaft - you need to grind it down to 1,5mm to fit it into the knuckle. Put a 5x2x2,5 mm bearing on the shaft and slide the rim onto the bearing - ready to roll. he rear is a bit more tricky but it can also be done... On most of my Epochs I only have bearings in the front, though... Only one has full bearings and the ones in the back have been done LATE at night, so they are not perfect as you can see in the picture - on the back those are Mini-Z-bearings by the way...

(hope you understand my poor english)

Last edited by janniz; 11-22-2005 at 12:33 AM.
Reply With Quote
  #3  
Old 11-22-2005, 04:45 AM
arfin arfin is offline
Senior Member
 
Join Date: Jul 2005
Posts: 108
Default

Good job Janniz! That's a mod i am working on right now.
Reply With Quote
  #4  
Old 11-22-2005, 05:03 AM
LBRC LBRC is offline
Senior Member
 
Join Date: Jul 2005
Posts: 178
Default

I put some photos in the gallery awhile back.

This way works but it is a bit of a pain to get perfectly lined up. The pin is reversed then epoxied in. I also made one with a larger bearing that replaces the stock wheel and clips right into a modified hub, but I used a lathe and a home made inside cutter to modify the hub and make the axle, eventually I will make the other side.

Never tried to put any in the stock motor mount, but all of the custom mounts Iíve made have them and they do make a difference.
Reply With Quote
  #5  
Old 01-13-2011, 10:15 AM
bctb107 bctb107 is offline
Newbie
 
Join Date: Jan 2011
Posts: 1
Default

Open this site you can find your answer
http://www.car-stuff.com/wheelbearing.htm
__________________
bctb107
Reply With Quote
  #6  
Old 10-26-2011, 05:56 PM
toreli toreli is offline
Newbie
 
Join Date: Oct 2011
Posts: 1
Default

janniz ,i can not see pictures ,please update it,thank you
__________________
"Our greatest glory is not in never failing, but in rising up every time we fail"
My Personal Blog
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hairball Medicine 2, Front wheel bearings LBRC Parts and Hop-Ups 4 04-06-2010 07:08 AM


All times are GMT. The time now is 06:56 AM.

 


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.